How to use silicone baking mold?

Baking cakes, biscuits, muffins, brownies, etc. can be made by silicone baking mold at home. If you have been fascinated and want to start your own baking journey, you must to know how to use silicone baking molds.

We provide a simple method of making cake with silicone mold

1. Make the cake according to the cake making formula or your own unique formula

2. Lightly spray a small amount of anti-stick baking pan oil on the surface of the silicone mold before baking.

3. You need a brush to glaze the mold and use a spatula or spatula to remove the batter from the mixing bowl. And put the raw materials according to the shape of the silicone cake mold and shape the cake.

4. Put the cake silicone mold filled with ingredients into the oven.

5. After baking, take out the cake silicone mold and let it cool naturally.

6. Take the finished cake out of the silicone mold and demold it.

Cleaning and maintenance of silicone moulds

1. Before using sillicone baking mold for the first time, clean it with water or detergent to remove surface dust. Before the mold is used for baking, a small amount of butter can be used to coat the inside of the mold. When using continuous molds, if there is an empty tank, add water to the empty tank, and empty burning is prohibited.

2. After each use, it can be soaked in the diluted detergent for 10-30 minutes. When cleaning, please use a soft cloth to clean. Do not use rough cleaning balls and other items to clean, so as to avoid scratches and damage to the mold. After cleaning, please dry it and place it in a storage box. Silica gel is prone to electrostatic reaction and will absorb tiny particles and dust in the air. When it is not used for a long time, it should not be directly exposed to the air.

3. When used in an oven, it must be placed in the middle of the oven, keeping a distance of about 10cm from the heating tube and 5cm from the walls of the oven to avoid high temperature damage to the mold.

4. Part of the mold has cracks. This is cut when leaving the factory, which is convenient for buyers to demold. If it is not cut, it cannot be demolded. When in use, make the cuts well, wrap them with plastic wrap or rubber bands and pour the liquid into it.